Do-It-Yourself Menu Bottle

December 25, 2008  at 1:37 PM
It's the holidays and what better way than to give your friends a home cooked feast for Christmas. Here is a very quick and simple tutorial on how you can use branches or twigs, some clay and a used glass bottle to create a special 'Menu Display' piece for the dining table.

We will be needing:
1. Dead branches or twigs
2. White clay
3. Used glass bottle (washed and cleaned dry)
4. Acrylic Paint (White or any colour that you prefer)
5. Permanent markers

Wash the branches and twigs then let dry under the sun. Once they are dry, give your artistic instincts a go at floral display. Stick some of your favourite twigs into the bottle and adjust until you are satisfied with the look of it. I've picked some different types and sizes of twigs, but only used the ones that I thought were more pretty to go with the bottle. So go on and try mixing and matching.



Now that we've chosen the perfect twigs, paint the glass bottle with the acrylic paint. Try using different colours, such as earth colours or a mix of warm colours. Get creative, but bear in mind the concept of what you are aiming to achieve. In this case, I've used white acrylic paint to balance with the earth tones of my home.

When the glass bottle is dry, put the twigs or branches back into the bottle. At this point, I've decided to decorate the twigs with some clay balls so that it would not look so bare. To make the clay balls, scoop a small amount of white clay and roll into little balls. Use a little water if the clay becomes too dry. Stick these clay balls onto the tips of the twigs or branches. Use a little white glue if you feel necessary. Let dry.



Delight your friends with a tantalizing menu written on a bottle. They will be very excited to see what's for lunch. Or dinner. Use permanent markers on the painted glass bottle. Be as creative as possible : ) Place your masterpiece on the dining table as a common menu and table display feature.



Here's what I've prepared for my friends.



Merry Christmas and a Happy New Year to you all : )

--Contributors--
Andy
Hui En

Handmade Pledge

December 21, 2008  at 1:58 PM

I took a handmade pledge today : )
The cute Handmade Pledge on my side bar is done by Door Sixteen.

Do-It-Yourself Mini Japanese Cyborg Monster Shelf

December 18, 2008  at 6:37 PM
Ever wonder how many milk cartons you have used and thrown away? Here is an example of how you can recycle and turn these under-appreciated breakfast packaging into mini shelves using simple yet creative methods. Let your imagination run wild : )

Firstly, draw out a sketch of how you envision your mini shelf to look like. For this tutorial, I am going to draw out a little sketch of a cyborg monster looking carton. Sketching is a good way to give you a direction as you are building on the design of the shelf. Remember to date the sketch as this will let you recall when you did these wonderful doodles.



Now, prepare your materials. We will be needing:
1. Penknife
2. White Glue/UHU GLue
3. Acrylic Paint (Black & White)
4. Paint Brushes
5. Cloth
6. Ruler
7. Brown Strings
8. White Cardboard
9. A Bowl of Water
10. Black Marker
11. Transparent Plastic Tubes
12. Used Milk Carton (washed and dried)



Following the sketch as a rough guide, use a black marker to draw and cut out a rectangular hole from the milk carton for the 'mouth' of the monster. This hole will also be where the shelves are located.



After that, paint the whole milk carton using White arcylic paint. Let dry for a few minutes after the first coat then apply the second coat to cover the images and wordings on the box. Wait for the paint to dry. Acrylic paints dry rather quickly, so be careful not to let your brushes dry up with the paint. If they do, soak the brushes in turpentine, and you're all set.



While waiting for the paint to dry, we can start to make the Japanese 'Floor Mat' Shelving. Use a ruler to draw and measure out two 7x7cm squares on the cardboard. Cut these out with a penknife. Place some white glue or UHU glue on one cardboard square. Then gently wrap the brown strings around the cardboard in a repeated motion. Wrap until the whole cardboard is nicely covered up with the strings. There you have it, a DIY mini Japanese floor mat shelf. Repeat for the other cardboard to make two shelves.


Now that the white acrylic paint on the carton is dry, dip a thin brush into the black acrylic paint and paint out the hair and eyes of the monster. Don't worry if the paint goes off course. Let it dry then paint over with white acrylic again. If the acrylic paint gets too dry and lumpy, dilute it with only a few drops of water. Paint the milk carton cap black too. Then let dry.



Once everything is dry, cut out three 17cm long transparent plastic tubes. Glue the ends of the tubes onto the sides of the carton box to make the cyborg monster's mechanic like ears. Or hands.



Finally, glue the Japanese floor mat shelves into the hole of the carton box.



Tada! Now we have a Mini Japanese Cyborg Monster Shelf. You can now place your favourite miniature collections onto these shelves and decorate your walls and tables with these little adorable crafts. Want to share? Create your very own milk carton shelves and remember to leave a photo link in the comments or post photos of your creations at my Flickr Group:

http://www.flickr.com/groups/975243@N21/

Enjoy :D

Related Posts with Thumbnails